NTN BEARING-SUDAMERICANA, S.A.

tapered roller bearings

The U type tapered roller bearings are an exception within the conventional tapered roller bearings since this is a compact unit type that includes the grease and is pre-regulated without having to install an opposite bearing. Furthermore, they have a flange on the outer ring that is fastened axially in the application once the bearing is mounted.Two rows of rollers give these bearings load capacities over five times higher than comparably sized tapered-roller bearings. One-Way Locking Needle-Roller Bearing Clutches. The needles in these bearings roll freely in one direction, but lock to transmit torque when the rotation of the shaft is reversed.

 

Tapered roller bearings must be cons tantly subjected to a sufficiently high load. Based on experience, a minimum radial load of the order of P C0r/60 is necessary. In most cases, however, the radial load due to the inherent weight of the bearing parts and the external.

 

41,275 mm x 88,9 mm x 29,37 mm FBJ HM803145/HM803110 tapered roller bearings
2.50 mm
146000 N
49,987 mm x 82,55 mm x 22,225 mm FBJ LM104947/LM104911 tapered roller bearings
Seeding
-20 °C
95 mm x 170 mm x 32 mm CYSD 30219 tapered roller bearings
AN 26
S 126x4.1/2
SNR 30209C tapered roller bearings
200.0000 mm
4500 rpm
200 mm x 310 mm x 70 mm SNR 32040A tapered roller bearings
11000 rpm
25.000 mm
75 mm x 150 mm x 38 mm NKE T7FC075 tapered roller bearings
4800 rpm
114000 N
◂ Previous page Next page ▸
All Products Contact Now
Product Categories
angular contact ball bearings
bearing units
complex bearings
cylindrical roller bearings
deep groove ball bearings
linear bearings
needle roller bearings
plain bearings
self aligning ball bearings
spherical roller bearings
tapered roller bearings
thrust ball bearings
thrust roller bearings
wheel bearings
NTN Ucp206d1 Bearing
NTN 6203 Lb Bearing
Set401 Bearing
NTN Ucp208d1 Bearing