NTN BEARING-SUDAMERICANA, S.A.

tapered roller bearings

The U type tapered roller bearings are an exception within the conventional tapered roller bearings since this is a compact unit type that includes the grease and is pre-regulated without having to install an opposite bearing. Furthermore, they have a flange on the outer ring that is fastened axially in the application once the bearing is mounted.Two rows of rollers give these bearings load capacities over five times higher than comparably sized tapered-roller bearings. One-Way Locking Needle-Roller Bearing Clutches. The needles in these bearings roll freely in one direction, but lock to transmit torque when the rotation of the shaft is reversed.

 

Tapered roller bearings must be cons tantly subjected to a sufficiently high load. Based on experience, a minimum radial load of the order of P C0r/60 is necessary. In most cases, however, the radial load due to the inherent weight of the bearing parts and the external.

 

AST A6075/A6157 tapered roller bearings
SNW 34x5.15/16
171.45 mm
AST M88048/M88011 tapered roller bearings
16.00 mm
50.000 mm
ISB 30320J/DFC400 tapered roller bearings
4.00 mm
Two Seals
80 mm x 140 mm x 26 mm FAG 30216-A tapered roller bearings
182000 N
2.50 mm
FAG Z-567171.TR1 tapered roller bearings
90400 N
9600 rpm
73.025 mm x 117.475 mm x 30.163 mm NACHI 33287/33462 tapered roller bearings
45 N/mm²
e7
155,575 mm x 330,2 mm x 79,375 mm Timken H936340/H936310 tapered roller bearings
90-17
1000 rpm
65 mm x 112,712 mm x 28 mm Timken JM511946/3920 tapered roller bearings
7500 r/min
1.1 mm
◂ Previous page Next page ▸
All Products Contact Now
Product Categories
angular contact ball bearings
bearing units
complex bearings
cylindrical roller bearings
deep groove ball bearings
linear bearings
needle roller bearings
plain bearings
self aligning ball bearings
spherical roller bearings
tapered roller bearings
thrust ball bearings
thrust roller bearings
wheel bearings
NTN Ucp206d1 Bearing
NTN 6203 Lb Bearing
Set401 Bearing
NTN Ucp208d1 Bearing