NTN BEARING-SUDAMERICANA, S.A.

tapered roller bearings

The U type tapered roller bearings are an exception within the conventional tapered roller bearings since this is a compact unit type that includes the grease and is pre-regulated without having to install an opposite bearing. Furthermore, they have a flange on the outer ring that is fastened axially in the application once the bearing is mounted.Two rows of rollers give these bearings load capacities over five times higher than comparably sized tapered-roller bearings. One-Way Locking Needle-Roller Bearing Clutches. The needles in these bearings roll freely in one direction, but lock to transmit torque when the rotation of the shaft is reversed.

 

Tapered roller bearings must be cons tantly subjected to a sufficiently high load. Based on experience, a minimum radial load of the order of P C0r/60 is necessary. In most cases, however, the radial load due to the inherent weight of the bearing parts and the external.

 

Fersa 2580/2523 tapered roller bearings
Fersa
2580/2523
Fersa 395A/394A tapered roller bearings
12
3.5 mm
Fersa 3878/3820 tapered roller bearings
26 mm
5.5 mm
Fersa 15126/15250 tapered roller bearings
20000 r/min
17 mm
Fersa F15190 tapered roller bearings
1.00 mm
224000 N
133,35 mm x 190,5 mm x 39,688 mm FBJ 48385/48320 tapered roller bearings
179000 N
130.000 mm
25 mm x 52 mm x 22 mm FBJ 33205 tapered roller bearings
82.55 mm
158 kN
◂ Previous page Next page ▸
All Products Contact Now
Product Categories
angular contact ball bearings
bearing units
complex bearings
cylindrical roller bearings
deep groove ball bearings
linear bearings
needle roller bearings
plain bearings
self aligning ball bearings
spherical roller bearings
tapered roller bearings
thrust ball bearings
thrust roller bearings
wheel bearings
NTN Ucp206d1 Bearing
NTN 6203 Lb Bearing
Set401 Bearing
NTN Ucp208d1 Bearing