NTN BEARING-SUDAMERICANA, S.A.

angular contact ball bearings

Angular contact ball bearings have inner and outer ring raceways that are displaced relative to each other in the direction of the bearing axis. This means that these bearings are designed to accommodate combined loads, i.e. simultaneously acting radial and axial loads.An angular contact bearing is a type of specialty ball bearing used in many manufacturing and industrial applications. This relatively small device is designed to support a greater range of forces than a standard bearing, and to work within even the most precisely engineered machines and equipment.Angular Contact Ball Bearings. Angular contact bearings from Grainger can support combined loads simultaneously in radial and axial directions. Use them for high-speed, high-precision applications, such as turbines and dentistry equipment, where dual-direction loads are present.

Angular Contact Ball Bearings. Angular contact ball bearings support both radial and axial loads through asymmetric races that house the bearing's spherical rolling elements, also called bearing balls, on an angle. The deeper the angle between the bearing and its axis.

51 mm x 89 mm x 44 mm PFI PW51890044/42CS angular contact ball bearings: Lw : 13.8 mm; Dw : 2.5 mm

30 mm x 138 mm x 72 mm PFI PHU2277 angular contact ball bearings: d3 : 980 mm; G3 : 13 mm

40 mm x 74 mm x 36 mm PFI PW40740036/34CS angular contact ball bearings: Basic static load rating C0 : 1930 kN; B4 : 31.5 mm

38 mm x 76 mm x 43 mm PFI PW38760043/40CSHD angular contact ball bearings: Calculation factor kr : 0.025; Calculation factor f0 : 13

42 mm x 76 mm x 40 mm PFI PW42760040/37CS angular contact ball bearings: Basic Static Radial Load Rating Co : 415000 N; Accessories : Two Shields

30 mm x 122 mm x 56 mm PFI PHU3030 angular contact ball bearings: C2 : 3.8 mm; Reference grease quantity Gref : 12 cm³

25 mm x 42 mm x 9 mm SNFA VEB 25 7CE1 angular contact ball bearings: Fw : 60 mm; Limiting speed : 7500 r/min

55 mm x 80 mm x 13 mm SNFA HB55 /S/NS 7CE1 angular contact ball bearings: d1 ≈ : 891 mm; Calculation factor e : 0.3

50 mm x 80 mm x 16 mm SNFA VEX 50 /S 7CE1 angular contact ball bearings: Limiting speed : 1900 r/min; D1 ≈ : 423 mm

15 mm x 24 mm x 5 mm SNFA SEA15 7CE1 angular contact ball bearings: Sealed Speed Rating n3 : 3000 rpm; D : 150.0000 mm

90 mm x 125 mm x 18 mm SNFA HB90 /S/NS 7CE1 angular contact ball bearings: d2 : 68.659 mm; L : 200.025 mm

130 mm x 165 mm x 18 mm SNFA SEA130 /NS 7CE1 angular contact ball bearings: Ca : 123.8 mm; Stabilizing ring : SR-38-32