NTN BEARING-SUDAMERICANA, S.A.

angular contact ball bearings

Angular contact ball bearings have inner and outer ring raceways that are displaced relative to each other in the direction of the bearing axis. This means that these bearings are designed to accommodate combined loads, i.e. simultaneously acting radial and axial loads.An angular contact bearing is a type of specialty ball bearing used in many manufacturing and industrial applications. This relatively small device is designed to support a greater range of forces than a standard bearing, and to work within even the most precisely engineered machines and equipment.Angular Contact Ball Bearings. Angular contact bearings from Grainger can support combined loads simultaneously in radial and axial directions. Use them for high-speed, high-precision applications, such as turbines and dentistry equipment, where dual-direction loads are present.

Angular Contact Ball Bearings. Angular contact ball bearings support both radial and axial loads through asymmetric races that house the bearing's spherical rolling elements, also called bearing balls, on an angle. The deeper the angle between the bearing and its axis.

8 mm x 22 mm x 7 mm SNFA VEX 8 /NS 7CE3 angular contact ball bearings: Bearing (basic designation) : C 3134 K; A2 : 226 mm

40 mm x 68 mm x 15 mm SNFA VEX 40 /NS 7CE3 angular contact ball bearings: Da max. : 938 mm; Basic dynamic load rating C : 3050 kN

110 mm x 150 mm x 20 mm SNFA VEB 110 /S 7CE3 angular contact ball bearings: P150° : 173 kN; Ca : 95.809 mm

80 mm x 125 mm x 22 mm SNFA VEX 80 7CE3 angular contact ball bearings: H : 192.484 mm; A1 : 98.425 mm

20 mm x 47 mm x 14 mm SNFA E 220 /S/NS 7CE3 angular contact ball bearings: Basic Dynamic Radial Load Rating C : 85800 N; d : 80.000 mm

50 mm x 80 mm x 16 mm SNFA VEX 50 /S/NS 7CE3 angular contact ball bearings: Diameter D3 : 46.10 mm; Basic Dynamic Radial Load Rating : 25500 N

50 mm x 90 mm x 20 mm SNFA E 250 /NS 7CE3 angular contact ball bearings: Mass pillow block : 23.1 kg; Labyrinth ring (db shaft position) : LOR 89

70 mm x 110 mm x 20 mm SNFA HX70 /S 7CE1 angular contact ball bearings: Cap bolt, rec. tightening torque : 850 N·m; Bearing (basic designation) : 23188 K

25 mm x 42 mm x 9 mm SNFA VEB 25 /S 7CE3 angular contact ball bearings: B : 22.00 mm; Basic Dynamic Radial Load Rating C : 55300 N

15 mm x 32 mm x 9 mm SNFA VEX 15 /NS 7CE1 angular contact ball bearings: Accessories : Two Shields; Basic Dynamic Radial Load Rating C : 81900 N

150 mm x 190 mm x 20 mm SNFA SEA150 7CE3 angular contact ball bearings: d : 440 mm; rb max. : 5 mm

105 mm x 190 mm x 36 mm SNFA E 200/105 7CE1 angular contact ball bearings: Fillet Radius ra : 2.50 mm; d : 110.000 mm