tapered roller bearings
The U type tapered roller bearings are an exception within the conventional tapered roller bearings since this is a compact unit type that includes the grease and is pre-regulated without having to install an opposite bearing. Furthermore, they have a flange on the outer ring that is fastened axially in the application once the bearing is mounted.Two rows of rollers give these bearings load capacities over five times higher than comparably sized tapered-roller bearings. One-Way Locking Needle-Roller Bearing Clutches. The needles in these bearings roll freely in one direction, but lock to transmit torque when the rotation of the shaft is reversed.
Tapered roller bearings must be cons tantly subjected to a sufficiently high load. Based on experience, a minimum radial load of the order of P C0r/60 is necessary. In most cases, however, the radial load due to the inherent weight of the bearing parts and the external.
- Gamet 200127X/200215H tapered roller bearings
- 2.5 kg
- 170 mm
- Gamet 181118/181200XH tapered roller bearings
- 3600 rpm
- 100.000 mm
- 98,425 mm x 158,75 mm x 42 mm Gamet 160098X/160158XC tapered roller bearings
- 619.125 mm
- 339.999 mm
- Gamet 80030/80066XH tapered roller bearings
- 136.5 mm
- 40 mm
- Gamet 110055/110096XH tapered roller bearings
- 1900 rpm
- 56.00 mm
- Gamet 240139X/240241XH tapered roller bearings
- 1.85 kg
- 180 mm
- Gamet 244230/244330H tapered roller bearings
- 3 500 min-1
- 4.149 kN