self aligning ball bearings
Self-aligning ball bearings have two rows of balls, a common sphered raceway in the outer ring and two deep uninterrupted raceway grooves in the inner ring. They are available open or sealed. The bearings are insensitive to angular misalignment of the shaft relative to the housing , which can be caused, for example, by shaft deflection.Self-aligning ball bearings Designed to handle misalignment MRC self-aligning bearings have two rows of balls with a common sphered raceway in the outer ring. This gives the bearings their self-aligning property, permitting angular misalignment of the shaft relative to the housing.
This type of ball bearing is recommended when alignment of the shaft and housing is difficult and the shaft may flex. The outer ring has a spherical raceway and its center of curvature coincides with that of the bearing; therefore, the axis of the inner ring, balls and cage can deflect to some extent around the bearing.
- 5 mm x 19 mm x 6 mm ISO 135 self aligning ball bearings
- 75
- 5 mm x 19 mm x 6 mm
- 45 mm x 100 mm x 36 mm ISO 2309K self aligning ball bearings
- 241/530 EK30W33+AOH2
- 885 Kg
- 30 mm x 72 mm x 27 mm ISO 2306K+H2306 self aligning ball bearings
- 20900 kN
- 57000 kN
- Toyana 128 self aligning ball bearings
- 26
- 19,1 kN
- 12 mm x 32 mm x 14 mm NTN 2201S self aligning ball bearings
- 3,6 mm
- 28,575 mm
- 30 mm x 62 mm x 20 mm NTN 2206S self aligning ball bearings
- 34 mm
- 1800 r/min
- 63,5 mm x 139,7 mm x 31,75 mm RHP NMJ2.1/2 self aligning ball bearings
- 39,2 kN
- 63,5 mm x 139,7 mm x 31,75 mm
