NTN BEARING-SUDAMERICANA, S.A.

tapered roller bearings

The U type tapered roller bearings are an exception within the conventional tapered roller bearings since this is a compact unit type that includes the grease and is pre-regulated without having to install an opposite bearing. Furthermore, they have a flange on the outer ring that is fastened axially in the application once the bearing is mounted.Two rows of rollers give these bearings load capacities over five times higher than comparably sized tapered-roller bearings. One-Way Locking Needle-Roller Bearing Clutches. The needles in these bearings roll freely in one direction, but lock to transmit torque when the rotation of the shaft is reversed.

 

Tapered roller bearings must be cons tantly subjected to a sufficiently high load. Based on experience, a minimum radial load of the order of P C0r/60 is necessary. In most cases, however, the radial load due to the inherent weight of the bearing parts and the external.

 

22,225 mm x 52,388 mm x 26,975 mm ISB 1380/1328 tapered roller bearings
39.5 mm
25.5 kN
1270 mm x 1465 mm x 100 mm ISB 306/1270-1 tapered roller bearings
8000 rpm
52.0000 mm
140 mm x 250 mm x 42 mm ISB 30228 tapered roller bearings
245 kN
66 mm
FAG 31322-X-N11CA tapered roller bearings
3300 rpm
30.00 mm
40 mm x 68 mm x 16,4 mm NACHI 40KC683 tapered roller bearings
4000 rpm
170.0000 mm
NACHI 09074/09194 tapered roller bearings
0.375 in
1/4-28 SAE-LT
◂ Previous page Next page ▸
All Products Contact Now
Product Categories
angular contact ball bearings
bearing units
complex bearings
cylindrical roller bearings
deep groove ball bearings
linear bearings
needle roller bearings
plain bearings
self aligning ball bearings
spherical roller bearings
tapered roller bearings
thrust ball bearings
thrust roller bearings
wheel bearings
NTN Ucp206d1 Bearing
NTN 6203 Lb Bearing
Set401 Bearing
NTN Ucp208d1 Bearing