NTN BEARING-SUDAMERICANA, S.A.

angular contact ball bearings

Angular contact ball bearings have inner and outer ring raceways that are displaced relative to each other in the direction of the bearing axis. This means that these bearings are designed to accommodate combined loads, i.e. simultaneously acting radial and axial loads.An angular contact bearing is a type of specialty ball bearing used in many manufacturing and industrial applications. This relatively small device is designed to support a greater range of forces than a standard bearing, and to work within even the most precisely engineered machines and equipment.Angular Contact Ball Bearings. Angular contact bearings from Grainger can support combined loads simultaneously in radial and axial directions. Use them for high-speed, high-precision applications, such as turbines and dentistry equipment, where dual-direction loads are present.

Angular Contact Ball Bearings. Angular contact ball bearings support both radial and axial loads through asymmetric races that house the bearing's spherical rolling elements, also called bearing balls, on an angle. The deeper the angle between the bearing and its axis.

30 mm x 55 mm x 13 mm SNFA HX30 /S/NS 7CE1 angular contact ball bearings: Bolt Pattern D : 2 3/4 in; Frame Accepts These Shaft Sizes (Bearing Bore) : 40 mm

95 mm x 120 mm x 13 mm SNFA SEA95 7CE1 angular contact ball bearings: d1 : 570 mm; G : Tr 630x6

35 mm x 72 mm x 17 mm SNFA E 235 /S/NS /S 7CE1 angular contact ball bearings: d : 35 mm; r1,2 min. : 1 mm

45 mm x 75 mm x 16 mm SNFA VEX 45 7CE3 angular contact ball bearings: Basic dynamic load rating C : 4180 kN; Basic static load rating C0 : 11800 kN

10 mm x 22 mm x 6 mm SNFA VEB 10 /NS 7CE1 angular contact ball bearings: Oil Speed Rating n2 : 4300 rpm; Fillet Radius ra : 2.00 mm

160 mm x 200 mm x 20 mm SNFA SEA160 /NS 7CE1 angular contact ball bearings: Pa : 27.4 kN; H : 257.175 mm

25 mm x 47 mm x 12 mm SNFA VEX 25 /NS 7CE1 angular contact ball bearings: Grease Speed Rating n1 : 7300 rpm; Fillet Radius ra : 1.00 mm

35 mm x 47 mm x 7 mm SNFA SEA35 7CE3 angular contact ball bearings: Hydraulic nut : HMV 126E; G2 : M 8

12 mm x 21 mm x 5 mm SNFA SEA12 7CE3 angular contact ball bearings: Mass pillow block : 144 kg; P120° : 84.5 kN

95 mm x 130 mm x 18 mm SNFA HB95 /S 7CE3 angular contact ball bearings: B : 34 mm; r1s (min) : 1.5 mm

55 mm x 80 mm x 13 mm SNFA HB55 /S/NS 7CE3 angular contact ball bearings: Grease Speed Rating n1 : 6400 rpm; B : 20.00 mm

8 mm x 24 mm x 8 mm SNFA E 208 /NS 7CE3 angular contact ball bearings: Limiting speed : 2400 r/min; rb max. : 4 mm