NTN BEARING-SUDAMERICANA, S.A.

angular contact ball bearings

Angular contact ball bearings have inner and outer ring raceways that are displaced relative to each other in the direction of the bearing axis. This means that these bearings are designed to accommodate combined loads, i.e. simultaneously acting radial and axial loads.An angular contact bearing is a type of specialty ball bearing used in many manufacturing and industrial applications. This relatively small device is designed to support a greater range of forces than a standard bearing, and to work within even the most precisely engineered machines and equipment.Angular Contact Ball Bearings. Angular contact bearings from Grainger can support combined loads simultaneously in radial and axial directions. Use them for high-speed, high-precision applications, such as turbines and dentistry equipment, where dual-direction loads are present.

Angular Contact Ball Bearings. Angular contact ball bearings support both radial and axial loads through asymmetric races that house the bearing's spherical rolling elements, also called bearing balls, on an angle. The deeper the angle between the bearing and its axis.

30 mm x 140 mm x 56,5 mm PFI PHU2040 angular contact ball bearings: R2 : 39.688 mm; L : 539.75 mm

41 mm x 169 mm x 54,5 mm PFI PHU3193 angular contact ball bearings: Fillet Radius ra : 1.00 mm; d : 40.000 mm

30 mm x 138 mm x 55,9 mm PFI PHU2174 angular contact ball bearings: Basic Static Radial Load Rating Co : 245000 N; Grease Speed Rating Open/Shielded n1 : 1900 rpm

28 mm x 120 mm x 61,5 mm PFI PHU59001 angular contact ball bearings: Sealed Speed Rating n3 : 12000 rpm; Basic Static Radial Load Rating Co : 4750 N

34 mm x 64 mm x 37 mm PFI PW34640037CSHD angular contact ball bearings: L : 96 mm; Hexagonal key size for grub screw N : 3.175 mm

40 mm x 76 mm x 33 mm PFI PW40760033/28CS angular contact ball bearings: Oil Speed Rating Open/Shielded n2 : 3400 rpm; D : 190.0000 mm

35 mm x 66 mm x 37 mm PFI PW35660037CS angular contact ball bearings: r2 min. : 1 mm; Lubricant : Regular relubricatio

37,6 mm x 203 mm x 157,8 mm PFI PHU5057 angular contact ball bearings: r1,2 min. : 1.5 mm; D : 150 mm

27 mm x 124 mm x 75 mm PFI PHU590118 angular contact ball bearings: Fillet Radius ra : 1.00 mm; Basic Dynamic Radial Load Rating C : 52700 N

28 mm x 139 mm x 64,5 mm PFI PHU2027 angular contact ball bearings: Fillet Radius ra : 1.50 mm; Basic Static Radial Load Rating Co : 26000 N

8 mm x 22 mm x 7 mm SNFA VEX 8 7CE3 angular contact ball bearings: Recommended diameter for attachment bolts, mm G : 10 mm; J7 : 11 mm

45 mm x 75 mm x 16 mm SNFA HX45 /S/NS 7CE1 angular contact ball bearings: Cap bolt, SAE grade : 8; Ca : 107.798 mm