NTN BEARING-SUDAMERICANA, S.A.

angular contact ball bearings

Angular contact ball bearings have inner and outer ring raceways that are displaced relative to each other in the direction of the bearing axis. This means that these bearings are designed to accommodate combined loads, i.e. simultaneously acting radial and axial loads.An angular contact bearing is a type of specialty ball bearing used in many manufacturing and industrial applications. This relatively small device is designed to support a greater range of forces than a standard bearing, and to work within even the most precisely engineered machines and equipment.Angular Contact Ball Bearings. Angular contact bearings from Grainger can support combined loads simultaneously in radial and axial directions. Use them for high-speed, high-precision applications, such as turbines and dentistry equipment, where dual-direction loads are present.

Angular Contact Ball Bearings. Angular contact ball bearings support both radial and axial loads through asymmetric races that house the bearing's spherical rolling elements, also called bearing balls, on an angle. The deeper the angle between the bearing and its axis.

AST 5215 angular contact ball bearings: Accessories : One Shield; Oil Speed Rating n2 : 8000 rpm

AST H7040C/HQ1 angular contact ball bearings: Db min. : 219 mm; d : 130 mm

30 mm x 62 mm x 23,8 mm FAG 3206-BD angular contact ball bearings: Basic Dynamic Radial Load Rating C : 174000 N; Grease Speed Rating Open/Shielded n1 : 3200 rpm

130 mm x 200 mm x 33 mm FAG HCS7026-E-T-P4S angular contact ball bearings: Basic Static Radial Load Rating Co : 118000 N; d : 120.000 mm

20 mm x 52 mm x 22,2 mm FAG 3304-B-TVH angular contact ball bearings: Calculation factor e : 0.33; Db min. : 126 mm

34 mm x 62 mm x 37 mm FAG 531910 angular contact ball bearings: Da max. : 119 mm; D1 ≈ : 113 mm

95 mm x 200 mm x 45 mm FAG 7319-B-JP angular contact ball bearings: d : 75.000 mm; Fillet Radius ra : 2.00 mm

130 mm x 180 mm x 24 mm FAG HCB71926-E-2RSD-T-P4S angular contact ball bearings: d1 : 108.33 mm; r1,2 min. : 1.5 mm

95 mm x 145 mm x 24 mm FAG B7019-C-T-P4S angular contact ball bearings: P150° : 105 kN; S : 4.763 mm

190 mm x 340 mm x 55 mm FAG QJ238-N2-MPA angular contact ball bearings: Pu : 11.050 kN; Oil : 2 500 min-1

50 mm x 110 mm x 44,4 mm FAG 3310-BD-2HRS-TVH angular contact ball bearings: Basic Dynamic Radial Load Rating C : 1050000 N; Grease Speed Rating n1 : 960 rpm

35 mm x 55 mm x 10 mm FAG HCS71907-E-T-P4S angular contact ball bearings: Accessories : Snap-Ring; Oil Speed Rating Open/Shielded n2 : 3900 rpm